The E-flite® Eratix™ 3D 25e ARF is a 3D-capable sport plane designed to make the transition from sport models to more challenging 3D aircraft a lot less demanding. Its large wing area and light wing loading offer very forgiving flight characteristics, especially in slow flight. It’s also compatible with a range of motor and propeller sizes so you can fine tune the power and performance to your skill level. Both the E-flite Power 25 and Power 32 brushless outrunner motors bolt to the firewall without any modifications. Experienced 3D pilots will appreciate the uniquely designed, machined aluminum 3D control arms that can handle the rigors of high-torque mini servos and large control throws. Sport aerobatics or stick-bending 3D, the Eratix 3D 25e is up for whatever you are.
Product Specifications
| Wingspan: | 54 in (1370mm) |
| Overall Length: | 53 in (1350mm) |
| Wing Area: | 695 sq in (44.9 sq dm) |
| Flying Weight: | 3.75–4 lb (1.7–1.8 kg) |
| Motor: | Scorpion SII-3026-710KV (V2) (Specs see below) |
| Radio: | Hitec Aurora, With Optima 6 receiver |
| Servos: | 4 metal-gear minis |
| Trim Scheme Colors: | UltraCote Lite White (HANU973), Safety Orange (HANU892), Fluorescent Blue (HANU896), and Clear (HANU964) |
| CG (center of gravity): | 3.75–4 in (80–100mm) from leading edge |
| Prop Size: | VOX Wood Electric 13 x 7 |
| Spinner Size: | 2.5″ |
| Hardware Included: | Yes |
| Speed Control : | 60A ESC OPTO |
| Battery: | 4S 14.8V 2650mAh Li-Po SLS 40C |
| Control Throw (Ailerons): | High Rate: 3 in (75mm) up and down; Low Rate: 1 in (25mm) up and down |
| Control Throw (Elevator): | High Rate: 3.5 in (90mm) up and down; Low Rate: 1 in (25mm) up and down |
| Control Throw (Rudder): | High Rate: 4.5 in (115mm) left and right; Low Rate: 2 in (50mm) left and right |
Scorpion SII 3026 V2 -710KV Specifications
| Stator Diameter | 30.0 mm (1.18 in) |
| Stator Thickness | 26 mm (1.02 in) |
| No. of Stator Arms | 12 |
| Magnet Poles | 14 |
| Motor Wind | 10 Turn Delta |
| Motor Wire | 16-Strand 0.25mm |
| Motor Kv | 710 RPM / Volt |
| No-Load Current (IO/10V) | 1.56 Amps |
| Motor Resistance (Rm) | 0.022 Ohms |
| Max Continuous Current | 60 Amps |
| Max Continuous Power | 1000 Watts |
| Weight | 205 Grams (7.23 oz) |
| Outside Diameter | 37.50 mm (1.47 in) |
| Shaft Diameter | 4.98 mm (0.196 in) |
| Body Length | 51.75 mm (2.04 in) |
| Overall Shaft Length | 80.5 mm (3.17 in) |
| Max Lipo Cell | 5s |
| Motor Timing | 5deg |
| Drive Frequency | 8kHz |
